Hi Vis Jacket Dromex DB-WETPRO-LNB Storm Wetpro Thermal Lime & Navy Blue


R652.25 - R978.38 excl. VATR750.09 - R1,125.14 incl. VAT

i Choose one of the colours below and then choose a size

View cart

Additional information



, , , , , , ,

Categories Hi Vis Safety Jackets
WETPRO HI-VIZTHERMAL JACKETDescriptionDromex® STORM WETPRO-LNB storm and freezer wear jacket, is a two-tone high visibility thermal and water-resistant jacket protecting the body and under-garments from the hazards of rain, water splashes and cold temperatures. STORM WETPRO-LNB features an inner polyester quilted Taffeta lining that keeps the wearer warm, whilst the outer Polyester Oxford keeps the garment dry.The jacket design consists of the following:• Collared jacket with internal hanger loop.• A concealed fixed stow away hood with drawstring fasteners and Velcro closure for safety. Prevents the hood from attaching to objects when not in use and promotes aesthetics.• A heavy-duty chunky nylon open end zip with metal puller, outer storm flap that has large plastic press studs for ease of use when wearing gloves. • An internal storm cuff to prevent water from running down your sleeves. • There are 2 large waist jet pockets on the jacket with straight cut flaps, that prevents water from seeping into the pockets. The utility bellow pocket with Velcro closure on the right breast preventing the contents from falling out.• Internal left breast pockets: useful in keeping your wallet etc from getting wet.• High visibility reflective tape on arms, wrist, shoulders, waist and breast for enhanced high visibility when working in poor lighting environments.• Easy drying after washing due to the inner jacket water drainage system.Suitable for applications where there is exposure to rain and water and used in petrochemical, marine industry, agriculture, mining, outdoor and contractor applications.Special InstructionsDo not use when working with chemicals.This type of garment is not designed for warm working conditions.Keep clear of open flames.None of the materials or processes used in the manufacture of these products are known to be harmful to the wearer.The manufacturer has examined under the system for ensuring quality of production by means of monitoring and inspection.These jackets are designed to accommodate the basic safety requirements and standards for Personal Protective Equipment.The information contained herein is intended to assist the wearer in the selection of personal protective equipment. Actual conditions of use cannot be directly simulated in a test environment therefore it is the responsibility of the end user and not the manufacturer or supplier to determine the jackets suitability for the intended use.All jackets be should be thoroughly inspected before and after use to ensure no damage is present.Compliance & ConformityThis jacket is designed for protection against foul weather increments only as per the EN directive 89/686/EEC. This garment meets the requirements of ergonomics, harmless materials, comfort, aeration and flexibility as well as the water tightness of the garment.SpecificationsStyle: Water-resistant, 2 tone, lime/navy blue reflective, thermal jacket with stow away hood. Fabric composition: Outer fabric - 300D, 100% Oxford Polyester. Inner fabric (lining) - 100% Polyester 190T Taffeta.Padding - 180gsm 100% Polyester.Storm cuff - 100% Polyester rib knit.Reflective tape: 50mm Silver.Mass:180gsm. Sizes AvailableXS to 5XL.Packaging, Storage & ObsolescenceThe standard packaging for the Storm WETPRO jacket is as follows.Each jacket is packaged in a polybag and sold indiviudally. Store the jackets in its original packaging in a cool dry place and out of direct sunlight. Cleaning & MaintenanceStorm WETPRO jackets should not be left in a contaminated condition if re-use is intended especially if potential hazards exist.The garments should be decontaminated before storage and re-use as indicated below:Do not bleach. Water temperatures must not exceed 40°C.No bleach product may be used as the garment is not colourfast or structurally designed to withstand any bleach.Cool iron. This garment may be smoothed or finished with an cool iron.Do not dry clean. This garment may not be commercially dry-cleaned.Cleaning of this garment is best done using a mild detergent with deodoriser, wipe clean or air dry.DisposalAll industrial waste should be disposed of correctly according to local regulations and good disposal practice. Water-resistant jackets should be disposed of considering the hazardous substance they were used for. Please consider recycling. Measurement ChartDB-WETPRO-LNB%5575RH3812mm40mm90mm50mm35mm40mmWarm WashCool IronDo notBleachDo not Tumble DryDo not Dry Clean40CPS ORMMADE IN CHINADB-WETPRO-LNB100% POLYESTERWash up to40C 40CDo not usebleachDo not Tumble DryDo not Dry CleanCool IronMarking/ LabelsDROMEX SIDEWINDERPosition: Position:Neck (inside) Side seam - Above hemSIZE LABELPosition:Neck (inside) XSS M L XL 2XL 3XL 4XL 5XL54 58 62 66 70 74 78828614.5 15.5 16.5 17.5 18.5 19.5 20.5 21.5 22.5Size½ ChestBody LengthNeck HeightShoulder WidthArmhole Sleeve LengthCuff Cuff HeightThermal Padded JacketJACKET GRADED SPECIFICATION SHEET69 72 75 78 81 84 8790937.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.526 27 28 29 30 31 32333467 68 69 70 71 72 7374759.5 10 10.5 11 11.5 12 12.5 13 13.566 6 6 6 6 666
Scroll to Top