Description:

• Cut from 2.0mm – 2.2mm full grain leather with mesh collar
• The padded bellows tongue improves comfort and prevents debris entering the boot
• The padded collar is from a Mesh fabric for enhanced breathability and laminated to an open cell foam for improved comfort
• 5 pair corrosion resistant D-ring lace-up for easy entry and exit of the boot
• Braided dual colour lace from polyester yarn with a central core for additional strength
• Reflective tape in quarter areas to increase visibility in low light conditions
• The tongue and quarter lining are from a non-woven, Sports Mesh fabric laminated to an open cell foam for enhanced comfort and improved support
• The vamp lining is from a hi-tech needle-fibre blend with excellent perspiration absorbency and treated with *Ultra- Fresh to impart hygienic and anti-bacterial properties to the material
• The in-sock is from an anti-static non-woven material and contains Poron Inserts at the heel and ball of the foot for enhanced comfort and support
• The Poron/EVA top sock is from a combination of polyester and wool, with excellent perspiration absorbency, and bonded to a layer of EVA, with Poron inserts at the ball and heel of the top sock
• The Poron inserts offer optimum support where it is needed most, ensuring dynamic impact compression and a gentle rebound with every step.
• The top sock responds to weight and temperature, moulding itself to the foot, resulting in fewer aches and pains
• The top sock has been treated with *Ultra-Fresh to impart hygienic and anti-bacterial properties to the material
• The sole is from Dual Density PU/PU with a SRC slip resistance rating
• The midsole is from a low density flexible Polyurethane with a shore hardness of 0,45 – 0,5
• The outer sole is from Polyurethane with a shore hardness of 0,64 – 0,65
• The boot is engineered with an EVA insert at the heel for added comfort and shock absorbency
• A shank reinforcement is molded into the midsole for additional arch support
• The boot can withstand temperatures up to 95°C
• The boot is anti-static
• Toe Cap: Steel – extra-wide fitting. Can withstand an impact load of 200 joules
• The Munich 2.0 boot has been tested to comply with EN / ISO 20345 specifications and carries the EN/ ISO 20345 certified mark. This
• product is manufactured in South Africa by BBF Safety Group, in an ISO 20345 accredited factory.

Views: 132